Differences

This shows you the differences between two versions of the page.

--- wiki:projection:projectionist [2026/08/09 20:11] – benrog
+++ wiki:projection:projectionist [2026/08/09 20:15] (current) – benrog
@@ Line 4: / Line 4: @@
 =====Qlab=====
 ====Video Output====
-Create a new NDI output in '' file>workspace settings>video>output routing>new output route'', call it something sensible such as ''DiCaffeine - //Show Name//''.
+Create a new NDI output in ''file > workspace settings > video > output routing > new output route'' , call it something sensible such as ''DiCaffeine - //Show Name//''.
 Next head to ''Video Outputs'' and Create one or more stages set to the area(s) you wish to project onto (using the warping tab). It is worth remembering that if you're final projected area is of a different aspect ratio to the initial area you will need to adjust the resolution to match so that what you're projecting doesn't get squished.
@@ Line 20: / Line 20: @@
 The iSolutions projector should project anywhere you might want it to, and is probably better than anything else we could get or hire in anyway.
-In 2026, Annex officer Rubens Pirie, with permission from the iSolutions AV team, ran a HDMI-DVI cable from Tardis to the projector. A Dicaffeine instance was then set up on the OPNsense/Proxmox machine in Tardis, and we were given a projector remote. This allows us to change the input of the projector, shutter and unshutter it, and power it on and off. The previous alternative method is left below for posterity.
+In 2026, Annex officer Rubens Pirie, with permission from the iSolutions AV team, ran a HDMI-DVI cable from Tardis to the projector. The dicaffeine box was left installed in Tardis, and we were given a projector remote. This allows us to change the input of the projector, shutter and unshutter it, and power it on and off. The previous alternative method is left below for posterity.
 //OLD METHOD//